specification:
Display: 128X64 LCD display
Working temperature:-20 °C ~ 65 °C(-4 °F ~ 140 °F)
Storage Temperature:-20 °C ~ 70 °C(-4 °F ~ 158 °F)
Dimendions: 136,5mm * 75,5mm * 22,5mm
weight: 260g
Multiple languages:
English, Russian, Spanish, French, Italian, German
Function:
1.Identify battery status Good,Bad or Replace
2.Check Battery Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
3.Check Internal resistance value (Ohm)
4.Display battery life in percentage (%)
5.Battery Cranking Test, load test
6.Battery Charging Test, Ripple Test 7.Support battery ripple test and review test data
Features:
1.Fast and accurate,Adopting best STM-32 main chipset and the world’s most advanced conductance testing technology,TOPDON BT100 provides you with reliable and accurate test results in seconds.
2.Accurate test results, using high precision amplifier and calibrated by professional battery testing tool, BT100 reading accuracy up to 99%.
3.Wide testing range cover from CCA 100- 2000 , 3- 220 AH, best in the market. 4.Industry initiative graphical battery voltage real time monitoring, can be analysis battery data more accurate.
5.Unique battery results display in percentage and meter mode.
6.Test all automotive cranking lead acid battery, including ordinary lead acid battery, AGM flat plate battery, AGM spiral battery, and Gel battery, etc. 7.Polarity reverse connection protection, reverse connection will not damage the tester or affect the vehicle and battery.
8.Directly test the battery with loss of electricity, no need to full charge before testing.
9.Testing standards include currently the world's majority of battery standards, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
10.Unique smart 3 LED indicators tell the battery status directly whether it is good, bad, or need to recharge. Digital LCD display with white backlight and contrast adjustment shows you clear and detailed information.
11.Versatile autotive battery tester:TOPDON BT100 battery tester is able to give an overall analysis of batteries health by checking its voltage charge, internal resistance and aging status. It tests cranking and charging system and alternator charging for motor vehicles, light trucks, RVs, automotive, boats, SUVs, ATVs and even law tractors.
12.Multiple Languages:English, Russian, Spanish, French, Italian, German
Advantage:
Simple and easy to use
Tests batteries on and off the vehicle
Accurate results in milliseconds
Battery life analysis
Analysis results: Good ,Bad or Replace
Large easy to read LCD screen
Test results based on CCA,BCI,CA,MCA,JIS,EN,DIN,SAE,GB and IEC Standards
Quick test - inputs battery volume (AH), then shows battery status
Vehicle cranking system test - cranking time, voltage and statu
Vehicle charging system test—load voltage, unloaded voltage, ripple status, and charging system status
Battery Test
Battery Test displays SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and the reliable analysis results on readable LCD screen for your reference. Regularly check your battery status for signs of weakness or erosion, keep a close eye on battery function you can fix potential problems before they happens.
Different Battery Test Result Displayed
GREEN LED ON:Good(＞80% capacity）
Yellow LED on:Recharge(50-80% capacity)
Red LED on: Replace(＜50% capacity)
1) Good: The battery is in good condition, you can rest assured of using it;
2) Recharge: The battery is good but with low current, please recharge it before next using;
3) Replace: The battery is almost or already broken, and you need to replace the battery.
Compatibility Battery
Refer to the battery label for battery type and cca values(cold cranking amp) 1.regular flooded
2.Agm flat plate
3.Agm spiral
4.Gel
5.Efb
Note: if your vehicle battery is not the battery mentioned aboube and you are not sure about which type it is,please choose AGM to cnduct test, and the error is within 10%
Battery Tester Application:
Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported.
CCA: Cold Cranking Amps (Range: 100~2000)
BCI: Battery Council International (100~2000)
CA: Cranking Amps (100~2000)
MCA: Marine Cranking Amps (100~2000)
JIS: Japan Industrial Standard (26A17~245H52)
DIN: German Auto Industry Committee (100~1400)
IEC: Internal Electrical Technical Commission (100~1400)
EN: European Automobile Industry Association (100~2000)
SAE: Society of Automotive Engineers (100~2000)
GB: China National Standard (30Ah~200Ah)
Cranking Test
Cranking Test to Know the State of the Starting System
Cranking voltage ＞10.5V,discharge performance good,no actions needed Cranking voltage 10V~10.5V,discharge performance not bad ,need recharging Cranking voltage 9.6V~9.9V,discharge performance bad,need replace
Cranking voltage ＜9.6V,discharge performance very bad,need replace ASAP 1). Entering cranking test and starting the engine as prompted, tester will automatically complete the test;
2). The tester will display the result including actual cranking voltage and actual cranking time;
3). If cranking voltage value is lower than 9.6V, the cranking system is regarded as abnormal;
4). If cranking voltage value is higher than 9.6V, the cranking system is OK.
Charging Test
Charging Test to Know More about Charging Volt
1). Charging Volt: Normal – the generator output is normal, no problem detected;
2). Charging Volt: Low – check the drive belt of the generator and the connection between generator and battery, or follow the manufacturer’s suggestion to eliminate generator fault;
3). Charging Volt: High – replace the generator assembly or a regulator to avoid battery damages;
4). No Volt Output – check the generator connection cable and the belt;
5). Diode Test – there is at least one diode is damaged if ripple volt is too high.
The screen will display instructions for the technician to press vehicle accelerator to increase RPM to 2500r/min and maintain 2500r/min for 5 seconds,please enter to display the test result,and the result you can reference manual.
Warnings:
Do not place the tester near the engine or exhaust pipe to avoid damage from high temperatures
Do not smoke,cause sparks,or strike matches near the battery when testing
Do not remove battery clamps while testing
Do not put the tester into a highly humid or dusty environment
Do not disassemble the tester
Package list:
1X BT100 Battery Tester
1X User Manual
